Warning: count(): Parameter must be an array or an object that implements Countable in /home1/exhausthooddepot/public_html/wp-content/themes/envision/cloudfw/core/engine.skin/core.skin_engine.php on line 1453

Warning: count(): Parameter must be an array or an object that implements Countable in /home1/exhausthooddepot/public_html/wp-content/themes/envision/cloudfw/core/engine.skin/core.skin_engine.php on line 1453

Warning: count(): Parameter must be an array or an object that implements Countable in /home1/exhausthooddepot/public_html/wp-content/themes/envision/cloudfw/core/engine.skin/core.skin_engine.php on line 1453

VHB Series

Exhaust Only Hood

CaptiveAire's Premier Type 2 Hood

Get a quote now!

Fully Integrated Package

CaptiveAire sells this hood as a stand-alone appliance to be integrated into a kitchen ventilation application, or provided as part of a FULLY INTEGRATED PACKAGE designed by CaptiveAire and pre-engineered for optimum performance. The package consists of the hood, an integral utility cabinet, factory pre-wired electrical controls, and a listed fire suppression system. Other options include a listed exhaust fan, a listed make-up air unit and listed, factory-built ductwork.

Drawings

Additional Information

Backsplash Installation
Frequently Asked Hood Questions
Operation & Maintenance Manual
Operation & Maintenance Manual (Spanish)
Operation & Maintenance Manual (French)
Written Specification

Certifications

The VHB Model has been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. and Canadian products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.

Models VHB are ETL Listed under file number 3186625SAT-001 and complies with UL710, ULC710 and ULC-S646 Standards.

The VHB Series is CaptiveAire's Premier Type II, Exhaust Only hood to be used over equipment not producing grease laden vapors. Type II hoods are used for condensation or heat removal applications.

Advantages

Exhaust Flow Rates: Superior exhaust flow rates.
Construction: Single wall type hood fabricated of Type 304 stainless steel, #3 or #4 polish, on all exposed surfaces when used in condensate applications. Type 430 stainless steel, #3 or #4 polish available when used for heat applications. Pre-punched hanging angles on each end of hood. Additional set provided for hoods longer than 12'.
Condensate Applications: Integral 4-sided perimeter gutter and one drain standard for high-moisture exhaust. Reduced Lead Times and Shipping Costs: Produced on a high volume assembly line at one of five manufacturing facilities to reduce lead times and shipping costs.
Optional REM Construction: Two options available when removable condensation baffles are required for heavy condensate applications. Designs available for one baffle or two baffle configuration to collect and drain condensation into gutter.
Optional Double Wall Construction: Double wall front used when switches are needed on the face of the hood and/or lights are desired. Mechanical baffle provides a built-in wiring chase for optimal positioning of electrical controls and outlets on the front face of the hood.
Optional Lights: Incandescent, LED and fluorescent lights are available.
Optional Make-Up Air: Make-up air can be supplied through optional front and/or side plenums (PSP Accessory).
Optional Enclosure Panels: Constructed of stainless steel. Sized to extend from hood top to ceiling, enclosing pipe and hanging parts.